10BASE-T Isolation Modules
Designed for IC's with integrated filter functions. These standard series of isolation modules meet the isolation and impedance matching requirements of IEEE 802.3 for 10BASE-T. To select the correct isolation module, please refer to the 10BASE-T Isolation Module Selector Guide.
- DIL 10BASE-T Single Port Isolation Modules -16 pin DIL Packages.
- SMD 10BASE-T Single Port Isolation Modules - 16 pin SOIC.
- PCMCIA 10BASE-T Single Port Isolation Modules - 16 pin footprint.
- Card Bus 10BASE-T Single Port Isolation Modules - 16 pin low profile SOIC.
- SMD 4.5KV 10BASE-T Isolation Modules - 12 pin, reinforced insulation.
- 10BASE-T Dual Port Isolation Modules - High density, 16 pin SOIC.
- Quatra™ Series Quad Port 10BASE-T - High density 40 pin package.
-
10BASE-T Fastjacks - Integrated RJ-45 Connectors
- Single Port 10BASE-T Integrated RJ-45 - With or without filters.
10BASE-T Filter Selector Guide
HALO offers a complete line of isolation modules to meet the isolation and impedance matching requirements of IEEE 802.3 for 10BASE-T. Modules are available in single and multilport packages. This selector guide is provided to help the designer select the correct magnetic device compatible with the corresponding IC. Please contact your local HALO representative if the silicon of your choice is not listed in this guide.
Notes:
-
* The TG55-1406N2 (x2) can be replaced by one TG01-1006N2 (RX) and one TG54-1006N2 (TX)
-
Ultra low profile devices are available for single port PCMCIA applications. Please contact your local HALO representative for additional information.
- HALO can also supply these parts in PCMCIA, Card Bus and 4.5 KV isolation versions.
For technical information contact Omni Pro Electronics at (800) 926-8926 or sales@omnipro.net
